Digimerge DH100 Series Manuel d'instructions télécharger pdf (Page 44)

32

Using the Main Menu

CAMERA SETUP

Configure camera color and

brightness properties and camera

name.

To configure the Camera Setup menu:

1. Click the channel number you wish to

c

onfigure.

2. Configure the following:

• Mask:

Select the checkbox to blank out the

channel. The channel continues to record,

but you will not be able to see the channel.

• Sharpness, Brightness, Contrast,

Saturation, Hue: Click -/+ to increase or

decrease the values.

• Name: Enter the desired channel name.

• Volume (channel 1 only): Adjust the

volume input level. You must connect an

audio input device to the DVR’s Audio IN

port (i.e self powered microphone or

audio-enabled camera (not included)).

3. Right-click and click Ye

s to save your

settings.

PTZ SETUP

Configure PTZ camera settings.

To configure the PTZ setup menu:

1. Click on the channel number that the PTZ

c

amera connects to.

2. Configure the following:

• Enabl

e PTZ: Select the checkbox to enable

the PTZ camera.

• Protocol: Select the PTZ camera’s

protocol.

• PTZ ID: Enter the PTZ ID.

• Baud Rate: Enter the PTZ baud rate.

NOTE: Refer to your PTZ camera

manufacturer for configuration details.

3. Right-click and click Ye

s to save your

settings.

Controlling the PTZ camera

To control your PTZ camera:

1. Double-click the channel that the PTZ

c

amera connects to, so that you are in full

screen mode.

2. Right-click and click PTZ Contr

ol.

3. Use the PTZ controls to manipulate the

ca

mera.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 139 140

Commentaires sur ces manuels

Pas de commentaire